9920228653

Linkedin
Instagram
317L Round Bar
GROUND FINIHSED MACHINED BARS 32205

GROUND FINIHSED MACHINED BARS 32205

Ground-Finished Machined Bars 32205

Home 9 Category: GROUND FINIHSED MACHINED BARS
Ground-Finished Machined Bars 32205

Ground-finished machined bar material stock, ASTM A276 UNS S32205 GRound Bar suppliers in Dubai, UAE, with discounts

Ground finished machined bar in India, Stainless Steel Rod in F60 Duplex At Low Prices, UNS S32205 Ground finished machined bar in India, ASTM S32205 Ground finished machined bar in India.

Detailed Information:

As a result of the high concentration of chromium, nitrogen, and molybdenum present in the alloy, RatnaExports.com can attribute the high quality and good performance of the UNS S32205 Ground finished machined bar. A high-yield-strength stainless steel grade such as Duplex 2205 is one of the most commonly used stainless steel grades and is characterized by its high yield strength in the UNS S32205 Ground finished machined bar.

There is twice as much yield strength in duplex alloy 2205 as in standard austenitic stainless steel grades. UNS S32205 Ground-finished machined bar shows excellent fatigue strength and resistance to stress-related corrosion cracking and general corrosion such as notches, pitting, and erosion-corrosion in severe environments.

In an annealed condition, the UNS S32205 Ground finished machined bar is composed of approximately 40-50% ferrite. In addition to ferritic grades’ strength and corrosion resistance, duplex microstructured UNS S32205 Ground finished machined bar has the corrosion resistance of austenitic grades. Compared to 317L stainless steel grade bars, the Ground bar has fine chloride pitting and crevice corrosion resistance. Additionally, the alloy can withstand marine environments and most concentrations of sulphuric acid without deteriorating. As a practical solution to chloride compound-induced stress cracking, duplex grade 2205 can be a viable alternative.

Stainless alloys UNS S32205 Ground-finished machined bars also resist sulfide-related stress corrosion cracking. Sulfide stress cracking occurs in sour gas or good sour environments. In both of these cases, it is important to note that the alloy tends to become brittle and lose its value due to becoming brittle. The UNS S32205 Ground finished machined bar-grade alloy precipitates the brittle microconstituents at temperatures above 300°C. Below -50°C, the microconstituents transition from ductile to brittle.

Ground Finished Machined Bars 32205 Specification

Standard

EN, DIN, JIS, BS, AISI, API, ASTM, ASME Round Bars

Specification

ASTM A276, A479 / ASME SA276, SA479

 

Finish

Bright Polished, Black, Polish, Rough Turned, Grinding, Centreless Ground, NO.4 Finish, Matt Finish & BA Finish

Tolerance

H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements

Condition

Annealed round bar, Cold Drawnd Polished Cold Drawn Centreless Ground & Polished, Sheared & Edged, Rolled Flat

Technique

ASTM A276 UNS S32205 Cold Rolled, Hot Rolled, Forged Round Bar, Cold Drawn, Rod

Form

Rod, Round, Channel Bar, T-Bar, Flat Bar, Precision Ground Bar, Blocks, Square, Rings, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round Bar, Ingot, Billet, I/H Bar, Forging, etc.

Manufacturing Process

  • Straightness up to 0.5mm/meter to 1mm /meter. 240,400,600 Grit Belt Pol
  • Peeled Bars: Dia. Ø15 mm -120 mm. Peeled, Straightened, Centreless Ground & Polished.
  • Cold Drawn Bright Bar: Dia. 2.5 mm to 14 mm. Annealed, Pickled, Cold Drawn, Centreless Ground & Polished.
  • Surface finish 0.5 µmm to 1.5µmm max>

Heat Treatment

  • Solution Annealing, Soft Annealing, Hardening & Tempering & Normalizing, Oil & Water Quenching,

 

Ground Finished Machined Bars 32205 Chemical Composition

C

MN

P

S

SI

CR

NI

MO

N

0.03 max

2.0 Max

0.03 Max

0.02 Max

1 Max

21 – 23

4.5 – 6.5

2.5 – 3.5

0.80 – 0.20

Ground Finished Machined Bars 32205 Mechanical Properties

Tensile Strength (ksi) min

Elongation (% in 50mm) min

Yield Strength 0.2% Proof (ksi) min

Hardness

655 (95)

25

450(65)

290 max

Ground Finished Machined Bars 32205 Surface Finish

CD

Cold drawn

P

Polished

BD

Bright drawn

SRE

Slit rolled edge

CG

Centreless ground

HF

Hot finished

CF

Cold finished

HRAP

Hot rolled, annealed, and pickled

P&T

Peeled and turned

RT

Rough-turned/peeled

ST

Smooth turned

PR

Peeled and reeled

 

Ground Finished Machined Bars 32205 Sizes

Size (mm)

Weight (kg/m)

Size (mm)

Weight (kg/m)

Size (mm)

Weight (kg/m)

7 x 7

0.337

19 x 19

2.479

38 x 38

9.916

8 x 8

0.44

20 x 20

2.747

40 x 40

10.988

9 x 9

0.556

21 x 21

3.029

42 x 42

12.114

10 x 10

0.687

22 x 22

3.324

45 x 45

13.906

11 x 11

0.831

24 x 24

3.956

48 x 48

15.822

12 x 12

0.989

25 x 25

4.292

50 x 50

17.168

13 x 13

1.161

26 x 26

4.642

53 x 53

19.29

14 x 14

1.346

28 x 28

5.384

55 x 55

20.774

15 x 15

1.545

30 x 30

6.181

60 x 60

24.723

16 x 16

1.758

32 x 32

7.032

65 x 65

29.015

17 x 17

1.985

34 x 34

7.939

70 x 70

33.65

18 x 18

2.225

36 x 36

8.9

75 x 75

38.629

 

Ground Finished Machined Bars Packed In 32205:

  • We understand the importance of packaging, especially in the case of international shipments, as the consignment has to go through several channels to reach the final destination. Thus we take proper care of packing.
  • We pack our goods in various ways depending on the products. The different ways in which our products are packed are :
  •  Shrink-wrapped
  • Wooden Boxes
  • Wooden Pallets
  • Wooden Crates
  • Carton boxes

Documents:

  • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
  • Commercial Invoice, including HS Code
  • Packing List including the number of boxes, net weight, gross weight, Marks, and Numbers
  • Fumigation Certificates
  • Letter of guarantee
  • Material Test Certificates as per EN 10204 3.1, EN 10204 3.2
  • Test Certificates certifying NACE MR0103, NACE MR0175
  • Raw Material Test Reports
  • Heat Treatment Charts
  • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
  • MATERIAL TRACEABILITY RECORDS
  • Quality Assurance Plan (QAP)
  • NABL-approved Laboratory Test Reports

Testings (Destructive, Non Destructive):

  • Positive Material Identification – PMI Testing
  • Chemical Analysis – Spectro Analysis
  • Mechanical Testing Such as Tensile, Elongation, Reduction of Area
  • Micro Test
  • Macro Test
  • Hardness Test
  • Pitting Resistance Test
  • Intergranular Corrosion (IGC) Test
  • Flaring Test
  • Flattening Test
  • Hydrostatic Test
  • Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
  • Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
  • Radiography Test
  • Dye Penetrant Test (DP Test)
  • Ultra Sonic Test (UT)
  • Eddy Current Testing
  • Impact Test
  • Bend Test

Application Of Ground Finishes Machined Bars 32205:

The following are some applications for GROUND FINISHED MACHINED BARS 316

  • The shanks of tools
  • Pistons and rods
  • Fasteners
  • Pinnings
  • An axle
  • Parts of motor shafts
  • Rods and mannequins
  • Rods with ties

Countries We Export:

Afghanistan, Albania, Algeria, Andorra, Angola, Antigua-Barbuda Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia-Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina-Faso, Burundi, Côte d’Ivoire, Cabo Verde, Cambodia, Cameroon, Canada, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo (Congo-Brazzaville), Costa-Rica, Croatia, Cuba, Cyprus, Czechia (Czech Republic), Democratic Republic of the Congo, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Eswatini (fmr. “Swaziland”), Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Holy See, Honduras, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Myanmar (formerly Burma), Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, North Korea, North Macedonia, Norway, Oman, Pakistan, Palau, Palestine-State, Panama, Papua, New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Sweden, Switzerland, Syria, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States of America, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, Zimbabwe.

Cities We Supply:

London, New-York, Paris, Moscow, Tokyo, Dubai, Singapore, Barcelona, Los-Angeles, Madrid Rome, Chicago, Toronto, San-Francisco, Abu-Dhabi, St-Petersburg, Amsterdam, Berlin Prague, Washington,Istanbul, Las-Vegas, Doha, Seoul, Sydney, Beijing,  Miami, Munich, Milan, San-Diego, Bangkok, Vienna, Dublin, Vancouver, Boston,  Zurich,  Melbourne, Budapest, Houston, Seattle, Montreal, Hong-Kong, Frankfurt, Sao-Paulo, Tel-Aviv, Copenhagen, Calgary, Orlando, Atlanta, Dallas, Hamburg, Osaka, Lisbon, Austin, Phoenix Naples, Oslo, Denver, Stockholm, Riyadh, Delhi, Buenos Aires, San-Jose, Brussels, Portland Philadelphia, Ottawa, Helsinki, Valencia, Brisbane, Warsaw, Minneapolis, Shanghai, Lyon, Adelaide, Edmonton, Marseille, Muscat, Athens, Stuttgart, Rio-De-Janeii, Baltimore, Auckland, Cologne, New-Orlean, Kuwait-City,  Kiev, Hanover, Perth, Minsk, Bucharest, Nashville, Dusseldorf, Manchester, Sacramento, Glasgow, Mexico-City, Salt-Lake-Ci, Raleigh, Cracow

GROUND FINIHSED MACHINED BARS 32750

GROUND FINIHSED MACHINED BARS 32750

Ground Finished Machined Bars 32750

Home 9 Category: GROUND FINIHSED MACHINED BARS
Ground Finished Machined Bars 32750

Super Ground Finished Machined Bars 32750, ASTM A276 UNS S32750 Forged Bars, Bar Suppliers UAE (Dubai)

Manufacturers of ground-finished machined bars UNS S32750 F53 flat bars and UNS S32750 F53 square bars in India.

Detailed Information:

Ground Finished machined bar 32750’s enhanced strength is also due to its higher molybdenum and chromium content, RatnaExports.com, which makes it more corrosion resistant than standard duplex stainless steel grades. High strength combined with cost-effective corrosion resistance is the benefit of the balanced dual microstructure phase.

Ground Finish machined bars 32750 have the same advantages as their counterparts – lower alloying costs than similar ferritic or austenitic grades. A reduction in the wall size is possible due to its high tensile strength. We can achieve this without compromising quality and strength.

The Ground Finished machined bar 32750 is typically available in solution-annealed condition. Ground Finished machined bar 32750 has a yield strength of approximately 550Mpa in an annealed condition, higher than most grades of austenitic and duplex stainless steel. It also has a higher PREN number. When metals like chromium, molybdenum, and nitrogen are added, a Pitting Resistance Equivalent Number (PREN) of greater than 41 is achieved. Ground Finish machined bar 32750 provides superior pitting and crevice corrosion resistance over austenitic and duplex stainless steels across a wide range of corrosion media and a Critical Pitting Temperature exceeding 50°C compared to austenitic and Ground Finished machined bar 32750 stainless sheets of steel.

UNS S32750 F53 Round Bars Specification

Standard A variety of ground bars are available, including EN, DIN, JIS, BS, AISI, API, ASTM, ASME
Specification In accordance with ASTM A276, A479 and ASME SA276, SA479
UNS S32750 ground bars special price for Clients in Dubai, UAE, Singapore, and Malaysia.
UNS S32750 ground bars size The diameter ranges from 3mm to 450mm
Length We can cut lengths from 3 meters to 6 meters according to your specifications
UNS S32750 Angle bar size A sheet of 3mm x 20 mm x 20 mm x 12 mm x 100 mm x 100 mm
UNS S32750 Square bar size 100mm~100mm*100mm
UNS S32750 Flat bar size Two millimeters thick by one hundred millimeters wide
Ten millimeters by 500 millimeters
UNS S32750 Hex Bar size Approximately 2mm by 100mm

 

UNS S32750 Ground Bar Chemical Composition

Element

S32750

C

0.030

Si

0.80

Mn

1.20

P

0.035

S

0.020

Cr

24.0/26.0

Mo

3.0/5.0

Ni

6.00/8.00

N

0.24/0.32

Other

Cu:0.50

UNS S32750 Ground Bar Mechanical Properties

Element

S32750

Tensile Strength(MPa)

795

Proof Stress 0.2% (MPa)

550

Elongation A5(%)

15

Hardness Max (HB-HRB)

310-32*

UNS S32750 Ground Bars Equivalent Grade

STANDARD

WERKSTOFF NR.

UNS

Super Duplex F53

1.4410

S32750

 

UNS S32750 Ground Bar Surface finish

CD

Cold drawn

P

Polished

BD

Bright drawn

SRE

Slit rolled edge

CG

Centreless ground

HF

Hot finished

CF

Cold finished

HRAP

Hot rolled, annealed, and pickled

P&T

Peeled and turned

RT

Rough-turned/peeled

ST

Smooth turned

PR

Peeled and reeled

 

Packing & Marking

The UNS32750 bar is packaged in such a way that it prevents damage during shipping. The purchaser may request a special marking on our products and marking with Grade, Lot No, Size, and our trademark when exporting ground machining UNS31803 bars. In contrast, standard export packaging is done in wooden cases.

Assurance of quality

At RatnaExports, every ground machining UNS32750 bar and UNS32750 bar hex bar undergoes strict inspections, starting with the material purchase. For conformance to ASTM, ASME, DIN, EN, and JIS codes and standards, we visually inspect them. We appoint certified Inspection Agencies upon request from our clients to witness the material reports, dimensions, and quality conformity of products.

Certificates of testing

With UNS S32750 Ground Bars, we provide the following details: Mill Test Certificate following EN 10204 3.1, PMI Testing, Test Reports from NABL Approved Laboratories, Third Party Inspection Reports 3.2, Ultrasonic Test Reports, and X-Ray Reports. Additionally, our supplied UNS31803 bar complies with NACE MR 0175 / 0103.

A ground machining application for UNS32750 bars

  • Chemistries tanks
  • Pape and paper industry
  • In the petrochemical industry
  • Energy-generating industries
  • Oil and gas
  • Processes involved in desalination
  • The architect and the contractor
  • The equipment used to process food
  • A plant that produces biofuels
  • Thanks for shipping and trucking
  • As part of the chemical industry, pumps, fans, centrifuges, and sulfur melting coils are used.
  • Sulfate and sulfite plants: blowers, blow lines, and digesters

Countries We Export:

Afghanistan, Albania, Algeria, Andorra, Angola, Antigua-Barbuda Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia-Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina-Faso, Burundi, Côte d’Ivoire, Cabo Verde, Cambodia, Cameroon, Canada, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo (Congo-Brazzaville), Costa-Rica, Croatia, Cuba, Cyprus, Czechia (Czech Republic), Democratic Republic of the Congo, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Eswatini (fmr. “Swaziland”), Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Holy See, Honduras, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Myanmar (formerly Burma), Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, North Korea, North Macedonia, Norway, Oman, Pakistan, Palau, Palestine-State, Panama, Papua, New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Sweden, Switzerland, Syria, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States of America, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, Zimbabwe.

Cities We Supply:

London, New-York, Paris, Moscow, Tokyo, Dubai, Singapore, Barcelona, Los-Angeles, Madrid Rome, Chicago, Toronto, San-Francisco, Abu-Dhabi, St-Petersburg, Amsterdam, Berlin Prague, Washington,Istanbul, Las-Vegas, Doha, Seoul, Sydney, Beijing,  Miami, Munich, Milan, San-Diego, Bangkok, Vienna, Dublin, Vancouver, Boston,  Zurich,  Melbourne, Budapest, Houston, Seattle, Montreal, Hong-Kong, Frankfurt, Sao-Paulo, Tel-Aviv, Copenhagen, Calgary, Orlando, Atlanta, Dallas, Hamburg, Osaka, Lisbon, Austin, Phoenix Naples, Oslo, Denver, Stockholm, Riyadh, Delhi, Buenos Aires, San-Jose, Brussels, Portland Philadelphia, Ottawa, Helsinki, Valencia, Brisbane, Warsaw, Minneapolis, Shanghai, Lyon, Adelaide, Edmonton, Marseille, Muscat, Athens, Stuttgart, Rio-De-Janeii, Baltimore, Auckland, Cologne, New-Orlean, Kuwait-City,  Kiev, Hanover, Perth, Minsk, Bucharest, Nashville, Dusseldorf, Manchester, Sacramento, Glasgow, Mexico-City, Salt-Lake-Ci, Raleigh, Cracow

GROUND FINIHSED MACHINED BARS 316

GROUND FINIHSED MACHINED BARS 316

Ground-Finished Machined Bars 316

Home 9 Category: GROUND FINIHSED MACHINED BARS
Ground-Finished Machined Bars 316

The suppliers and manufacturers of ground bars and fittings, along with the retailers and producers of electrical components and fittings, comprise the ground bar manufacturers, suppliers, and exporters.

Ground Bar properties, Ground Bar tolerances, Ground Bar applications in India

Detailed Information:

RatnaExports.com sheets are available in various sizes, including standard and metric sizes in grades 1045, 4140HT, 303SS, and 316SS. We can also manufacture special sizes according to your requirements. The highest degree of accuracy, concentricity, straightness, and surface perfection is achieved by our TG&P bars, which meet or exceed ASTM A108 standards. A standard bearing best suits these bars, usually undersized or nominal. Its diameter ranges between 0.197″ (5mm) and 9″ (3mm), with a typical length of 12 or 24 feet.

For the Ground process, a hot rolled bar or cold drawn bar is turned in a lathe. Achieving the desired steel bar size may take more than one pass. Since the bar’s surface roughness is still relatively rough, a grinding wheel only removes a small amount of roughness, resulting in uneven wear and balancing issues. When the bar has been approved regarding dimensions, it is polished with a polishing wheel.  

Precision ground steel bars are perfect for machining in environments that require a round, straight shape with a defined tight diameter tolerance and good roundness, straightness, and fine surface finish. In machining environments that require a round and square shape, ground bars are designed to rotate at high speeds with minimal vibrations and are made from copper, stainless steel, or galvanized steel. As a result of electrical storms and high-voltage electrical shocks, the ground bar protects electrical appliances and equipment. For this reason, all ground wires in various electrical circuits are connected to a neutral bar. The neutral and ground bars are often sold together as they are commonly used together.

Ground bars can be made of various materials, but copper is the most common for a faster and easier installation. It all depends on the customer’s requirements.

Extra costs are associated with these pre-drilled holes, but they are well worth it. If you want the installation to be even easier, then you need to purchase the necessary accessories, such as clamps, cables, and brackets. If you want peace of mind when installing ground bars, you can buy kits with all the necessary parts.

A specification for GROUND FINISHED MACHINED BARS 316 is as follows:

  • The range is 4mm to 100mm (1/4″ to 4″).
  • A surface finish of up to 0.2 Ra (12 RMS maximum)
  • The length may range from 20 feet 2 inches to 22 feet
  • The following grades are available: AISI 303, 304L, 316L, 410, 416, 420, 430F, 431, 174PH
  • Straightness: 0.5 mm per meter TIR (0.0015″ per foot)
  • The heat treatment process can be described as follows: Annealing, Solution Annealing, Oil Quenching, and Tempering.
  • It is manufactured under the following Werkstoff No. Codes: 1.4305, 1.4307, 1.4404, 1.4005, 1.4006, 1.4021, 1.4104, 1.4028, 1.4057, 1.4542, 1.4462.
  • Tolerances for diameters: h8, h9, f7, f8, e7, e8
  • Tolerance of half the diameter of an oval

Ground-finished machined bars have many benefits.

In addition to delivering short- and standard-length pump shaft steel bars, Circle H Steel specializes in supplying long bars up to 27 feet. These options offer a variety of benefits over shorter options. 

  • Raw materials produce more usable products with each piece
  • Material handling trips are reduced, resulting in lower fuel costs and fewer person-hours spent on them
  • A smaller number of pieces of material to store
  • Reduction in the number of welds, threads, or mates needed to join smaller parts

The following documents are related to the ground-finished machined bars 316:

  • The certificate of origin must be legalized/attested by a chamber of commerce or an embassy
  • The invoice with the HS code for a commercial transaction
  • The packing list includes the number of boxes, net weight and gross weight, marks, and numbers
  • Certificates of Fumigation
  • Guarantee letter
  • Test certificates for materials as per EN 10204 3.1 and EN 10204 3.2
  • Certificates certifying NACE MR0103 and MR0175
  • Reports of raw material tests
  • Charts for heat treatment
  • Documentation for welding procedures and procedures qualification, WPS/PQR
  • RECORDS OF MATERIAL TRACEABILITY
  • Plan for Quality Assurance (QAP)
  • Laboratory test reports approved by NABL 

316 ground-finished machined bars Testings (Destructive, Non Destructive):

  • Testing for Positive Material Identification (PMI)
  • Chemical Analysis – Spectro Analysis
  • Mechanical Testing Such as Tensile, Elongation, Reduction of Area
  • Micro Test
  • Macro Test
  • Hardness Test
  • Pitting Resistance Test
  • Intergranular Corrosion (IGC) Test
  • Flaring Test
  • Flattening Test
  • Hydrostatic Test
  • Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
  • Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
  • Radiography Test
  • Dye Penetrant Test (DP Test)
  • Ultra Sonic Test (UT)
  • Eddy Current Testing
  • Impact Test
  • Bend Test

 

Ground-finished machined bars packed in 316:

We understand the importance of packaging, especially in the case of international shipments, as the consignment has to go through some channels to reach the final destination. Thus we take proper care of packing.

  • We pack our goods in various ways depending on the products. The different ways in which our products are packed are :
  •  Shrink-wrapped
  • Wooden Boxes
  • Wooden Pallets
  • Wooden Crates
  • Carton boxes

Application of Ground Finishes Machined Bars 316:

The following are some applications for GROUND FINISHED MACHINED BARS 316

  • The shanks of tools
  • Pistons and rods
  • Fasteners
  • Pinnings
  • An axle
  • Parts of motor shafts
  • Rods and mannequins
  • Rods with ties

Countries We Export:

Afghanistan, Albania, Algeria, Andorra, Angola, Antigua-Barbuda Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia-Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina-Faso, Burundi, Côte d’Ivoire, Cabo Verde, Cambodia, Cameroon, Canada, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo (Congo-Brazzaville), Costa-Rica, Croatia, Cuba, Cyprus, Czechia (Czech Republic), Democratic Republic of the Congo, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Eswatini (fmr. “Swaziland”), Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Holy See, Honduras, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Myanmar (formerly Burma), Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, North Korea, North Macedonia, Norway, Oman, Pakistan, Palau, Palestine-State, Panama, Papua, New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Sweden, Switzerland, Syria, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States of America, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, Zimbabwe.

Cities We Supply:

London, New-York, Paris, Moscow, Tokyo, Dubai, Singapore, Barcelona, Los-Angeles, Madrid Rome, Chicago, Toronto, San-Francisco, Abu-Dhabi, St-Petersburg, Amsterdam, Berlin Prague, Washington,Istanbul, Las-Vegas, Doha, Seoul, Sydney, Beijing,  Miami, Munich, Milan, San-Diego, Bangkok, Vienna, Dublin, Vancouver, Boston,  Zurich,  Melbourne, Budapest, Houston, Seattle, Montreal, Hong-Kong, Frankfurt, Sao-Paulo, Tel-Aviv, Copenhagen, Calgary, Orlando, Atlanta, Dallas, Hamburg, Osaka, Lisbon, Austin, Phoenix Naples, Oslo, Denver, Stockholm, Riyadh, Delhi, Buenos Aires, San-Jose, Brussels, Portland Philadelphia, Ottawa, Helsinki, Valencia, Brisbane, Warsaw, Minneapolis, Shanghai, Lyon, Adelaide, Edmonton, Marseille, Muscat, Athens, Stuttgart, Rio-De-Janeii, Baltimore, Auckland, Cologne, New-Orlean, Kuwait-City,  Kiev, Hanover, Perth, Minsk, Bucharest, Nashville, Dusseldorf, Manchester, Sacramento, Glasgow, Mexico-City, Salt-Lake-Ci, Raleigh, Cracow

GROUND FINIHSED MACHINED BARS 32760

GROUND FINIHSED MACHINED BARS 32760

Ground Finished Machined Bars 32760

Home 9 Category: GROUND FINIHSED MACHINED BARS
Ground Finished Machined Bars 32760

Ground Bars 22760, UNS 32760 ground Bars manufacturers, UNS 32760 ground Bars dealers, UNS 32760 ground Bars suppliers, UNS 32760 ground Bars stockholders, UNS 32760 ground Bars importers, 

We export UNS 32760 ground Bars worldwide. We can provide you with UNS 32760 ground Bars size charts, UNS 32760 ground Bars weight charts, and UNS 32760 ground Bars price charts.

Detailed Information:

A UNS 32760 Ground Bar is made from copper, stainless steel, or galvanized steel used to connect the earth wires of electrical appliances and equipment to the ground in case of bad weather conditions, such as electrical storms. RatnaExport.com This is accomplished by connecting the earth’s wires to the ground. Several electrical circuits connect the ground wires to the neutral bar, and that’s why some stores sell the neutral bar and ground bar together since they’re commonly used together if you want to ground your circuit.

Different ground bars are available, but copper is the most commonly used material. The ground bars can be of varying thicknesses and lengths depending on the customer’s needs. Requesting predrilled holes to simplify and speed up installation is also possible.

These pre-drilled holes cause extra money, but they are worth it. If you wish the installation process to be even easier, purchase the necessary accessories, including clamps, cables, and brackets. Buying peace of mind with kits that include everything you need to install ground bars is possible.

There are various shapes for UNS 32760 Ground Bars, including rounds, squares, and hexagons.

In addition to having excellent weldability, low thermal expansion rate, good workability, and high mechanical efficiency, UNS 32760 Ground Bars suppliers may supply alloy stainless steel 2507 according to their specifications.UNS 32760 Ground Bars Hex Bar is available in an extensive selection at our store. Ground bars made from UNS 32760 are used in refineries and petrochemical plants, mechanical components requiring high strength, and the pulp and paper industry.

Compared to the finest in the world, the company manufactures the finest quality bright bars in India. Almost all popular grades are processed according to various national and international specifications. In addition, we make Bright Steel Bars in various shapes and sizes, conforming to different steel specifications, including BSS, EN series, SAE, ISI, DIN, and AISI.

Specifications for ground-finished machined bar 32760

Specifications The ASTM A276 and the ASME SA276 standards
Dimensions EN, DIN, JIS, ASTM, BS, ASME, and AISI
Size 12 mm to 6 mm in diameter.
Diameter Diameters between 6mm and 350mm
Thickness The length ranges from 100mm to 6000mm
Tolerance Approximately 0.2mm difference
Finish A black finish that is bright polished, rough turned, NO.4 finish, matte finish, and BA finish
Length The lengths can be custom cut from 1 meter to 6 meters
Form Forging or Forging Steels in Rounds, Squares, Hexagons (A/F), Rectangles, Billets, Ingots, etc.

 

The chemical composition of ground-finished machined bar 32760 is as follows:

Grade

C

Mn

Si

P

S

Cr

Mo

Ni

N

Fe

S32760

0.03

max

1.00 max

1.00 max

0.030 max

0.010 max

24.00 -– 26.00

3.00 -– 4.00

6.00 -– 8.00

0.20 -– 0.30

Mechanical properties of ground-finished machined bar 32760

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

7.8 g/cm3

1350 °C (2460 °F)

Psi – 80000, MPa – 550

Psi – 116000, MPa – 800

15 %

Equivalent grades of ground-finished machined bar 32760

STANDARD

WERKSTOFF NR.

UNS

Ground Bar UNS S32760

1.4410

S32760

 

Ground bar size chart in mm for UNS S32760

Dimensions of UNS S32760 ground bars

Metric

US Bar

ASTM/ Canadian

Japanese

Bar Size

Diam. (mm)

Bar Size

Diam. (Inch)

Bar Size

Diam. (mm2)

Bar Size

Diam. (mm)

5

5

#2

0.250

10M

100

6

6

5.5

5.5

#3

0.375

15M

200

10

10

6

6

#4

0.500

20M

300

13

13

7

7

#5

0.625

25M

500

16

16

8

8

#6

0.750

30M

700

19

19

9

9

#7

0.875

35M

1000

22

22

10

10

#8

1.000

45M

1500

25

25

11

11

#9

1.125

55M

2500

29

29

12

12

#10

1.250

 

 

32

32

14

14

#11

1.375

 

 

35

35

16

16

#12

1.500

 

 

38

38

18

18

#13

1.625

 

 

41

41

20

20

#14

1.750

 

 

44

44

22

22

#15

1.875

 

 

48

48

25

25

#16

2.000

 

 

51

51

28

28

#18

2.250

 

 

57

57

32

32

 

 

 

 

 

 

36

36

 

 

 

 

 

 

40

40

 

 

 

 

 

 

44

44

 

 

 

 

 

 

50

50

 

 

 

 

 

 

 

Ground Finished Machined Bars Packed In 32760:

  • Packing is particularly important when shipping internationally, as the consignment must travel through many channels before reaching its final destination.
  • Depending on the product, we pack our goods in various ways. These ways include:
  •  A shrink-wrapped package
  • Boxes made from wood
  • A pallet made of wood
  • A wooden crate
  • Boxes for cartons

Documents:

  • Legalized/attested by the Chamber of Commerce or Embassy
  • Commercial Invoice, including HS Code
  • The packing list includes the number of boxes, net weight and gross weight, marks, and numbers
  • Certificates of Fumigation
  • Assurance letter
  • Certificates of Material Tests as per EN 10204 3.1 and EN 10204 3.2
  • Test Certificates certifying NACE MR0103, NACE MR0175
  • Test results for raw materials
  • Heat Treatment Charts
  • Documentation of welding procedures and qualifications, WPS/PQR
  • MATERIAL TRACEABILITY RECORDS
  • Plans for quality assurance (QAPs)
  • A laboratory test report that NABL has approved

Testings (Destructive, Non Destructive):

  • Identification of positive materials (PMI)
  • Chemical Analysis – Spectro Analysis
  • Mechanical Testing Such as Tensile, Elongation, Reduction of Area
  • Testing at the micro level
  • Performing a macro test
  • Testing for hardness
  • Pitting Resistance Test
  • Corrosion between granules (IGC) test
  • Flaring Test
  • Flattening Test
  • Hydrostatic Test
  • A NACE TM0284 test for hydrogen-induced cracking (HIC) is available
  • The corrosion cracking caused by sulfur sulfide stress, NACE TM 0177
  • Radiography Test
  • Test for dye penetration (DP Test)
  • An ultrasonic test (UT) is performed
  • Tests using eddy currents
  • Impact Test
  • The bend test

Ground-finished machined bar 32760 applications and uses

  • Textile machine ground bars made from UNS 32760 Super Ground Bars
  • Some oil and gas companies use Ground Bar UNS 32760
  •  Pipeline systems for medical gas are made up of ground bars UNS 32760
  •  Pharmaceutical processing industries use ground bars UNS 32760

Countries We Export:

Afghanistan, Albania, Algeria, Andorra, Angola, Antigua-Barbuda Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia-Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina-Faso, Burundi, Côte d’Ivoire, Cabo Verde, Cambodia, Cameroon, Canada, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo (Congo-Brazzaville), Costa-Rica, Croatia, Cuba, Cyprus, Czechia (Czech Republic), Democratic Republic of the Congo, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Eswatini (fmr. “Swaziland”), Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Holy See, Honduras, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Myanmar (formerly Burma), Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, North Korea, North Macedonia, Norway, Oman, Pakistan, Palau, Palestine-State, Panama, Papua, New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Sweden, Switzerland, Syria, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States of America, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, Zimbabwe.

Cities We Supply:

London, New-York, Paris, Moscow, Tokyo, Dubai, Singapore, Barcelona, Los-Angeles, Madrid Rome, Chicago, Toronto, San-Francisco, Abu-Dhabi, St-Petersburg, Amsterdam, Berlin Prague, Washington,Istanbul, Las-Vegas, Doha, Seoul, Sydney, Beijing,  Miami, Munich, Milan, San-Diego, Bangkok, Vienna, Dublin, Vancouver, Boston,  Zurich,  Melbourne, Budapest, Houston, Seattle, Montreal, Hong-Kong, Frankfurt, Sao-Paulo, Tel-Aviv, Copenhagen, Calgary, Orlando, Atlanta, Dallas, Hamburg, Osaka, Lisbon, Austin, Phoenix Naples, Oslo, Denver, Stockholm, Riyadh, Delhi, Buenos Aires, San-Jose, Brussels, Portland Philadelphia, Ottawa, Helsinki, Valencia, Brisbane, Warsaw, Minneapolis, Shanghai, Lyon, Adelaide, Edmonton, Marseille, Muscat, Athens, Stuttgart, Rio-De-Janeii, Baltimore, Auckland, Cologne, New-Orlean, Kuwait-City,  Kiev, Hanover, Perth, Minsk, Bucharest, Nashville, Dusseldorf, Manchester, Sacramento, Glasgow, Mexico-City, Salt-Lake-Ci, Raleigh, Cracow

GROUND-FINISHED MACHINED BARS 31803

GROUND-FINISHED MACHINED BARS 31803

Duplex Steel UNS S31803 Round Bar

Home 9 Category: GROUND FINIHSED MACHINED BARS
Ground Finished Machined Bars 31803

UNS S31803 Duplex Bar, Duplex Steel UNS S31803 Round Bar Manufacturer and Supplier in India

Detailed Information:

S31803 Duplex Bar is a type of steel containing 22% chromium, known as a duplex steel due to its combination of austenitic and ferritic microstructures. This composition results in a material with moderate to good strength and excellent resistance to general corrosion, stress corrosion, and cracking. It performs well in chloride environments and is resistant to sulphide stress corrosion. Compared to standard austenitic stainless steels, the S31803 Duplex Bar offers roughly double the strength.

This steel is a versatile option, serving as a suitable alternative to 300 series austenitic stainless steels in many applications where higher mechanical strength and lower weight are desired. S31803 Duplex Bar is weldable using standard electric arc welding processes. However, oxyacetylene welding is not recommended due to the risk of carbon pickup in the weld metals. S31803 Duplex Bar offers a balance of strength, corrosion resistance, and weldability, making it a valuable choice for various industrial applications.

UNS S31803 Duplex Stainless Steel Round Bar, ASTM B626 Duplex Steel UNS S31803 Round Bar Manufacturers, Duplex Steel UNS S31803 Hex Bars Suppliers in India

Ratna Exports is a leading Duplex Steel UNS S31803 Round Bars manufacturer in India. The demand for Duplex Steel Round Bars is rising as the steel industry continues to grow. We produce Duplex Steel Round Bars in compliance with international quality standards, ensuring the highest quality products for our customers.

Ratna Exports is the largest Duplex Steel Round Bars supplier. These bars are versatile and find application across various industries. Available in various dimensions and sizes, our Duplex Steel UNS S31803 Round Bars can also be custom-manufactured to meet specific industrial requirements.

Duplex Steel Round Bars are favoured for their strong corrosion resistance and weldability, making them popular in many applications. To purchase the best quality Duplex Steel Round Bars, send us your requirements via email at [email protected].

Choose Ratna Exports for reliable, high-quality Duplex Steel UNS S31803 Round Bars that meet your industrial needs.

The specifications for ground-finished machined Bar 31803

Specification: ASTM/ASME A276, A479

Dimensions: ASTM, ASME, API

Size: 10mm to 100mm Diameter, 100mm to 6000mm Length

Form: Square, Round, Hexagonal (A/F), Rectangle, Wire (Coil Form), Wire Mesh, Billet, Ingot, Forging, etc.

Finish: Black, Bright, and Polish

 

Chemical Composition of Ground Finished Machined Bar 31803

Grade

C

Mn

Si

P

S

Cr

Mo

Ni

N

Fe

S31803

0.030 max

2.00 max

1.00 max

0.030 max

0.020 max

21.0 – 23.0

2.5 – 3.5

4.50 – 6.50

0.08 – 0.20

63.72 min

 

Mechanical Properties of Ground Finished Machined Bar 31803

Grades

Tensile Strength ( MPA) Min.

0.2 Yield Strength ( MPA) Min. 

Elongation     (%) Min.

Hardness      (BHN) Max.

S31803

620

450

25

290 BHN Max.

Ground Finished Machined Bar 31803 Equivalent Grades

STANDARD

WERKSTOFF NR.

UNS

Duplex S31803

1.4462

S31803

 

Assurance of quality

At The ground machining, UNS31803 bar and UNS31803 bar hex bars at RatnaExporter.com are subject to strict inspections throughout the process, starting with material purchase. We visually examine them for conformance to ASTM, ASME, DIN, EN, and JIS codes and standards. Appoint official certified Inspection Agencies upon request of our clients so they can witness the material reports, dimensions, and quality conformity of products.

Certificates of testing

We supply UNS S31803 Ground Bars with the following details Mill Test Certificate as per EN 10204 3.1, PMI Testing, Test Reports from NABL Approved Laboratories, 3.2 Certification by Third Party Inspection Agencies, Ultrasonic Test Reports, and X-Ray Reports. Our supplied ground machining UNS31803 bar also complies with NACE MR 0175 / 0103.

A ground machining application for UNS31803 bars

  • Tanks for chemicals
  • Industrie des pâtes et papiers
  • The Petrochemical Industry
  • Industries that generate electricity
  • The oil and gas industry
  • The desalination process
  • Architects and contractors
  • Equipment for food processing
  • Plants for producing biofuels
  • Ship and truck cargo tanks
  • Pumps, fans, centrifuges, and sulfur melting coils are used in the chemical industry.
  • Blower tanks, blow lines, and digesters in sulfate and sulfite plants

Packing & Marking

A ground machining UNS31803 bar is packaged to prevent damage during shipment. Ground machining UNS31803 bars are marked with Grade, Lot No, Size, and our trademark when exported; during standard export, the packaging is done in wooden cases. The purchaser can also request a special marking on our products.

Countries We Export:

Afghanistan, Albania, Algeria, Andorra, Angola, Antigua-Barbuda Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia-Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina-Faso, Burundi, Côte d’Ivoire, Cabo Verde, Cambodia, Cameroon, Canada, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo (Congo-Brazzaville), Costa-Rica, Croatia, Cuba, Cyprus, Czechia (Czech Republic), Democratic Republic of the Congo, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Eswatini (fmr. “Swaziland”), Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Holy See, Honduras, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Myanmar (formerly Burma), Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, North Korea, North Macedonia, Norway, Oman, Pakistan, Palau, Palestine-State, Panama, Papua, New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Sweden, Switzerland, Syria, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States of America, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, Zimbabwe.

Cities We Supply:

London, New-York, Paris, Moscow, Tokyo, Dubai, Singapore, Barcelona, Los-Angeles, Madrid Rome, Chicago, Toronto, San-Francisco, Abu-Dhabi, St-Petersburg, Amsterdam, Berlin Prague, Washington,Istanbul, Las-Vegas, Doha, Seoul, Sydney, Beijing,  Miami, Munich, Milan, San-Diego, Bangkok, Vienna, Dublin, Vancouver, Boston,  Zurich,  Melbourne, Budapest, Houston, Seattle, Montreal, Hong-Kong, Frankfurt, Sao-Paulo, Tel-Aviv, Copenhagen, Calgary, Orlando, Atlanta, Dallas, Hamburg, Osaka, Lisbon, Austin, Phoenix Naples, Oslo, Denver, Stockholm, Riyadh, Delhi, Buenos Aires, San-Jose, Brussels, Portland Philadelphia, Ottawa, Helsinki, Valencia, Brisbane, Warsaw, Minneapolis, Shanghai, Lyon, Adelaide, Edmonton, Marseille, Muscat, Athens, Stuttgart, Rio-De-Janeii, Baltimore, Auckland, Cologne, New-Orlean, Kuwait-City,  Kiev, Hanover, Perth, Minsk, Bucharest, Nashville, Dusseldorf, Manchester, Sacramento, Glasgow, Mexico-City, Salt-Lake-Ci, Raleigh, Cracow

GROUND FINISHED MACHINED BARS 304

GROUND FINISHED MACHINED BARS 304

304 Precision Ground Bars

Home 9 Category: GROUND FINIHSED MACHINED BARS
Ground Finished Machined Bars 304

304 Peeled Ground Bars Manufacturer in India Stainless Steel 304 Ground Finished Machined Bars Supplier in Mumbai, India

Detailed Information:

304 Ground Finished Machined Bars refer to bars made from stainless steel grade 304 that have undergone a machining process to achieve precise dimensions and a smooth surface finish. The term “ground finished” indicates that the bars have been mechanically ground to remove imperfections and achieve tight tolerances.

These bars are commonly used in industries requiring high precision and a polished surface, such as machinery, automotive components, and construction. The machining process ensures that the bars meet specific dimensional requirements and exhibit excellent surface quality, making them suitable for various applications.

Ratna Export’s ground bars are known for their exceptional straightness, minimal out-of-roundness, and smooth surface finish. These qualities are crucial for seamless and efficient production processes, especially in high-speed machining operations and precise feeds in automated lathes. Straightness is vital, particularly when working with long bars, ensuring consistent and accurate components.

Moreover, our stainless steel 304 ground bars exhibit minimal internal stresses, reducing the risk of distortion during machining. This makes them highly suitable for manufacturing long shafts, rolling bearings, and ball bushings. With these superior properties, our ground bars are favoured for various applications, guaranteeing smooth production and high-quality finished products.

Ground Bar Product Properties

Rough ground bar

Fine ground bar,

standard execution

Fine ground bar,

special execution

Size range

Ø 12 to 100 mm

Ø 12 to 100 mm

Ø 12 to 100 mm

Tolerances

≥ IT9

IT8

Down to IT6

Lengths

4 to 7 m

4 to 7 m

4 to 7 m

Surface smoothness

Max. Ra 5 µm

Ra 1.0 µm

Down to Ra 0.6 µm

Out OF roundness

Max. 50 % of the diameter tolerance,

measured as the difference in diameter

Max. 50 % of the diameter tolerance,

measured as the difference in diameter

Max. 50 % of the diameter tolerance,

measured as the difference in diameter

Straightness

0.5 mm/m

Down to 0.2 mm/m

Down to 0.1 mm/m

 

The diameter Tolerances

Metric Diameters

Dia – mm

ISO h6

ISO h7

ISO h8

ISO h9

ISO h10

ISO h11

1 < 3

0.006

0.010

0.014

0.025

0.040

0.060

3 < 6

0.008

0.012

0.018

0.030

0.048

0.075

6 < 10

0.009

0.015

0.022

0.036

0.058

0.090

10 < 18

0.011

0.018

0.027

0.043

0.070

0.110

18 < 30

0.013

0.021

0.033

0.052

0.084

0.130

30 < 50

0.016

0.025

0.039

0.062

0.100

0.160

50 < 80

0.019

0.030

0.046

0.074

0.120

0.190

80 < 120

0.022

0.035

0.054

0.087

0.140

0.220

120 < 180

0.063

0.100

0.160

0.250

180 < 250

0.072

0.115

0.185

0.290

250 < 275

0.081

0.130

0.210

0.320

Imperial Diameters

Dia – inches

ISO h6

ISO h7

ISO h8

ISO h9

ISO h10

ISO h11

0.039 < 0.118

0.00025

0.0004

0.0006

0.0010

0.0016

0.0024

0.118 < 0.236

0.0003

0.0005

0.0007

0.0012

0.0019

0.0030

0.236 < 0.393

0.0004

0.0006

0.0009

0.0014

0.0023

0.0035

0.393 < 0.707

0.0004

0.0007

0.0010

0.0016

0.0028

0.0043

0.707 < 1.181

0.0005

0.0008

0.0012

0.0020

0.0035

0.0051

1.181 < 1.969

0.0006

0.0010

0.0016

0.0025

0.0040

0.0063

1.969 < 3.150

0.0007

0.0012

0.0018

0.0030

0.0046

0.0075

3.150 < 4.724

0.0009

0.0014

0.0022

0.0035

0.0055

0.0087

4.724 < 7.087

0.0025

0.0039

0.0063

0.0098

7.087 < 9.843

0.0028

0.0045

0.0073

0.0114

9.843 <10.827

0.0031

0.0051

0.0083

0.0126

Documents:

  • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
  • Commercial Invoice, including HS Code
  • Packing List including the number of boxes, net weight, gross weight, Marks, and Numbers
  • Fumigation Certificates
  • Letter of guarantee
  • Material Test Certificates as per EN 10204 3.1, EN 10204 3.2
  • Test Certificates certifying NACE MR0103, NACE MR017
  • Raw Material Test Reports
  • Heat Treatment Charts
  • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
  • MATERIAL TRACEABILITY RECORDS
  • Quality Assurance Plan (QAP)
  • NABL-approved Laboratory Test Reports

    Testings (Destructive, Non Destructive):

    • Positive Material Identification – PMI Testing
    • Chemical Analysis – Spectro Analysis
    • Mechanical Testing Such as Tensile, Elongation, Reduction of Area
    • Micro Test
    • Macro Test
    • Hardness Test
    • Pitting Resistance Test
    • Intergranular Corrosion (IGC) Test
    • Flaring Test
    • Flattening Test

    Marking:

    • The test certificates we supply will align with all the product marking details.
    • When ordering cut pieces of Pipes, Sheets, or Round Bars, our mark is transferred from the product from which it is cut. In such cases, we provide a letter confirming the marking transfer and a photo of the product from which it is cut.

    Applications By Industry

    • Using a diameter difference as a measure

      • Piston Rods, Bolts, Crankshafts, Driveshafts, Feed Screws, Axles

      A difference in diameter

      • Piston Rods, Driveshafts, Crankshafts, Bolts, Feed Screws, Axles

      Infrastructure

      • Rolls, Journals, Bolts

      Fluid Handling 

      • Pump Shafts

      Machinery

      • Arbors, Journals, Spindles, Pins, Feed Screws

      Oil & Gas

      • Gears, Piston Rods, Multiple shaft applications

      Energy

      • Gears, Wind Turbine Shafts, Stub Shafts

      General Fabrication And Machining

      • Gears, Trunnion Wheels, Mandrels, Sockets, and Any application where a shaft is required

      Automotive & Transportation

      • Crankshafts, Driveshafts, Piston Rods, Wrist Pins, Stub Shafts, Axles, Torsion Bars

    Packing:

    • We understand the importance of packaging, especially in the case of international shipments, as the consignment has to go through some channels to reach the final destination; thus, we take proper care of packing.
    • Depending on the product, we pack our goods in different ways. We pack our products in the following ways:
    •  Shrink-wrapped
    • Wooden Boxes
    • Wooden Pallets
    • Wooden Crates
    • Carton boxes

    Countries We Export:

    Afghanistan, Albania, Algeria, Andorra, Angola, Antigua-Barbuda Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia-Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina-Faso, Burundi, Côte d’Ivoire, Cabo Verde, Cambodia, Cameroon, Canada, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo (Congo-Brazzaville), Costa-Rica, Croatia, Cuba, Cyprus, Czechia (Czech Republic), Democratic Republic of the Congo, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Eswatini (fmr. “Swaziland”), Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Holy See, Honduras, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Myanmar (formerly Burma), Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, North Korea, North Macedonia, Norway, Oman, Pakistan, Palau, Palestine-State, Panama, Papua, New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Sweden, Switzerland, Syria, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States of America, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, Zimbabwe.

    Cities We Supply:

    London, New-York, Paris, Moscow, Tokyo, Dubai, Singapore, Barcelona, Los-Angeles, Madrid Rome, Chicago, Toronto, San-Francisco, Abu-Dhabi, St-Petersburg, Amsterdam, Berlin Prague, Washington,Istanbul, Las-Vegas, Doha, Seoul, Sydney, Beijing,  Miami, Munich, Milan, San-Diego, Bangkok, Vienna, Dublin, Vancouver, Boston,  Zurich,  Melbourne, Budapest, Houston, Seattle, Montreal, Hong-Kong, Frankfurt, Sao-Paulo, Tel-Aviv, Copenhagen, Calgary, Orlando, Atlanta, Dallas, Hamburg, Osaka, Lisbon, Austin, Phoenix Naples, Oslo, Denver, Stockholm, Riyadh, Delhi, Buenos Aires, San-Jose, Brussels, Portland Philadelphia, Ottawa, Helsinki, Valencia, Brisbane, Warsaw, Minneapolis, Shanghai, Lyon, Adelaide, Edmonton, Marseille, Muscat, Athens, Stuttgart, Rio-De-Janeii, Baltimore, Auckland, Cologne, New-Orlean, Kuwait-City,  Kiev, Hanover, Perth, Minsk, Bucharest, Nashville, Dusseldorf, Manchester, Sacramento, Glasgow, Mexico-City, Salt-Lake-Ci, Raleigh, Cracow