317L Round Bar

Ground-Finished Machined Bars 32205

Home 9 GROUND FINIHSED MACHINED BARS 9 GROUND FINIHSED MACHINED BARS 32205
Ground-Finished Machined Bars 32205

Ground-finished machined bar material stock, ASTM A276 UNS S32205 GRound Bar suppliers in Dubai, UAE, with discounts

Ground finished machined bar in India, Stainless Steel Rod in F60 Duplex At Low Prices, UNS S32205 Ground finished machined bar in India, ASTM S32205 Ground finished machined bar in India.

Detailed Information:

As a result of the high concentration of chromium, nitrogen, and molybdenum present in the alloy, RatnaExports.com can attribute the high quality and good performance of the UNS S32205 Ground finished machined bar. A high-yield-strength stainless steel grade such as Duplex 2205 is one of the most commonly used stainless steel grades and is characterized by its high yield strength in the UNS S32205 Ground finished machined bar.

There is twice as much yield strength in duplex alloy 2205 as in standard austenitic stainless steel grades. UNS S32205 Ground-finished machined bar shows excellent fatigue strength and resistance to stress-related corrosion cracking and general corrosion such as notches, pitting, and erosion-corrosion in severe environments.

In an annealed condition, the UNS S32205 Ground finished machined bar is composed of approximately 40-50% ferrite. In addition to ferritic grades’ strength and corrosion resistance, duplex microstructured UNS S32205 Ground finished machined bar has the corrosion resistance of austenitic grades. Compared to 317L stainless steel grade bars, the Ground bar has fine chloride pitting and crevice corrosion resistance. Additionally, the alloy can withstand marine environments and most concentrations of sulphuric acid without deteriorating. As a practical solution to chloride compound-induced stress cracking, duplex grade 2205 can be a viable alternative.

Stainless alloys UNS S32205 Ground-finished machined bars also resist sulfide-related stress corrosion cracking. Sulfide stress cracking occurs in sour gas or good sour environments. In both of these cases, it is important to note that the alloy tends to become brittle and lose its value due to becoming brittle. The UNS S32205 Ground finished machined bar-grade alloy precipitates the brittle microconstituents at temperatures above 300°C. Below -50°C, the microconstituents transition from ductile to brittle.

Ground Finished Machined Bars 32205 Specification

Standard

EN, DIN, JIS, BS, AISI, API, ASTM, ASME Round Bars

Specification

ASTM A276, A479 / ASME SA276, SA479

 

Finish

Bright Polished, Black, Polish, Rough Turned, Grinding, Centreless Ground, NO.4 Finish, Matt Finish & BA Finish

Tolerance

H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements

Condition

Annealed round bar, Cold Drawnd Polished Cold Drawn Centreless Ground & Polished, Sheared & Edged, Rolled Flat

Technique

ASTM A276 UNS S32205 Cold Rolled, Hot Rolled, Forged Round Bar, Cold Drawn, Rod

Form

Rod, Round, Channel Bar, T-Bar, Flat Bar, Precision Ground Bar, Blocks, Square, Rings, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round Bar, Ingot, Billet, I/H Bar, Forging, etc.

Manufacturing Process

  • Straightness up to 0.5mm/meter to 1mm /meter. 240,400,600 Grit Belt Pol
  • Peeled Bars: Dia. Ø15 mm -120 mm. Peeled, Straightened, Centreless Ground & Polished.
  • Cold Drawn Bright Bar: Dia. 2.5 mm to 14 mm. Annealed, Pickled, Cold Drawn, Centreless Ground & Polished.
  • Surface finish 0.5 µmm to 1.5µmm max>

Heat Treatment

  • Solution Annealing, Soft Annealing, Hardening & Tempering & Normalizing, Oil & Water Quenching,

 

Ground Finished Machined Bars 32205 Chemical Composition

C

MN

P

S

SI

CR

NI

MO

N

0.03 max

2.0 Max

0.03 Max

0.02 Max

1 Max

21 – 23

4.5 – 6.5

2.5 – 3.5

0.80 – 0.20

Ground Finished Machined Bars 32205 Mechanical Properties

Tensile Strength (ksi) min

Elongation (% in 50mm) min

Yield Strength 0.2% Proof (ksi) min

Hardness

655 (95)

25

450(65)

290 max

Ground Finished Machined Bars 32205 Surface Finish

CD

Cold drawn

P

Polished

BD

Bright drawn

SRE

Slit rolled edge

CG

Centreless ground

HF

Hot finished

CF

Cold finished

HRAP

Hot rolled, annealed, and pickled

P&T

Peeled and turned

RT

Rough-turned/peeled

ST

Smooth turned

PR

Peeled and reeled

 

Ground Finished Machined Bars 32205 Sizes

Size (mm)

Weight (kg/m)

Size (mm)

Weight (kg/m)

Size (mm)

Weight (kg/m)

7 x 7

0.337

19 x 19

2.479

38 x 38

9.916

8 x 8

0.44

20 x 20

2.747

40 x 40

10.988

9 x 9

0.556

21 x 21

3.029

42 x 42

12.114

10 x 10

0.687

22 x 22

3.324

45 x 45

13.906

11 x 11

0.831

24 x 24

3.956

48 x 48

15.822

12 x 12

0.989

25 x 25

4.292

50 x 50

17.168

13 x 13

1.161

26 x 26

4.642

53 x 53

19.29

14 x 14

1.346

28 x 28

5.384

55 x 55

20.774

15 x 15

1.545

30 x 30

6.181

60 x 60

24.723

16 x 16

1.758

32 x 32

7.032

65 x 65

29.015

17 x 17

1.985

34 x 34

7.939

70 x 70

33.65

18 x 18

2.225

36 x 36

8.9

75 x 75

38.629

 

Ground Finished Machined Bars Packed In 32205:

  • We understand the importance of packaging, especially in the case of international shipments, as the consignment has to go through several channels to reach the final destination. Thus we take proper care of packing.
  • We pack our goods in various ways depending on the products. The different ways in which our products are packed are :
  •  Shrink-wrapped
  • Wooden Boxes
  • Wooden Pallets
  • Wooden Crates
  • Carton boxes

Documents:

  • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
  • Commercial Invoice, including HS Code
  • Packing List including the number of boxes, net weight, gross weight, Marks, and Numbers
  • Fumigation Certificates
  • Letter of guarantee
  • Material Test Certificates as per EN 10204 3.1, EN 10204 3.2
  • Test Certificates certifying NACE MR0103, NACE MR0175
  • Raw Material Test Reports
  • Heat Treatment Charts
  • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
  • MATERIAL TRACEABILITY RECORDS
  • Quality Assurance Plan (QAP)
  • NABL-approved Laboratory Test Reports

Testings (Destructive, Non Destructive):

  • Positive Material Identification – PMI Testing
  • Chemical Analysis – Spectro Analysis
  • Mechanical Testing Such as Tensile, Elongation, Reduction of Area
  • Micro Test
  • Macro Test
  • Hardness Test
  • Pitting Resistance Test
  • Intergranular Corrosion (IGC) Test
  • Flaring Test
  • Flattening Test
  • Hydrostatic Test
  • Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
  • Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
  • Radiography Test
  • Dye Penetrant Test (DP Test)
  • Ultra Sonic Test (UT)
  • Eddy Current Testing
  • Impact Test
  • Bend Test

Application Of Ground Finishes Machined Bars 32205:

The following are some applications for GROUND FINISHED MACHINED BARS 316

  • The shanks of tools
  • Pistons and rods
  • Fasteners
  • Pinnings
  • An axle
  • Parts of motor shafts
  • Rods and mannequins
  • Rods with ties

Countries We Export:

Afghanistan, Albania, Algeria, Andorra, Angola, Antigua-Barbuda Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia-Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina-Faso, Burundi, Côte d’Ivoire, Cabo Verde, Cambodia, Cameroon, Canada, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo (Congo-Brazzaville), Costa-Rica, Croatia, Cuba, Cyprus, Czechia (Czech Republic), Democratic Republic of the Congo, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Eswatini (fmr. “Swaziland”), Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Holy See, Honduras, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Myanmar (formerly Burma), Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, North Korea, North Macedonia, Norway, Oman, Pakistan, Palau, Palestine-State, Panama, Papua, New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Sweden, Switzerland, Syria, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States of America, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, Zimbabwe.

Cities We Supply:

London, New-York, Paris, Moscow, Tokyo, Dubai, Singapore, Barcelona, Los-Angeles, Madrid Rome, Chicago, Toronto, San-Francisco, Abu-Dhabi, St-Petersburg, Amsterdam, Berlin Prague, Washington,Istanbul, Las-Vegas, Doha, Seoul, Sydney, Beijing,  Miami, Munich, Milan, San-Diego, Bangkok, Vienna, Dublin, Vancouver, Boston,  Zurich,  Melbourne, Budapest, Houston, Seattle, Montreal, Hong-Kong, Frankfurt, Sao-Paulo, Tel-Aviv, Copenhagen, Calgary, Orlando, Atlanta, Dallas, Hamburg, Osaka, Lisbon, Austin, Phoenix Naples, Oslo, Denver, Stockholm, Riyadh, Delhi, Buenos Aires, San-Jose, Brussels, Portland Philadelphia, Ottawa, Helsinki, Valencia, Brisbane, Warsaw, Minneapolis, Shanghai, Lyon, Adelaide, Edmonton, Marseille, Muscat, Athens, Stuttgart, Rio-De-Janeii, Baltimore, Auckland, Cologne, New-Orlean, Kuwait-City,  Kiev, Hanover, Perth, Minsk, Bucharest, Nashville, Dusseldorf, Manchester, Sacramento, Glasgow, Mexico-City, Salt-Lake-Ci, Raleigh, Cracow